A car sandbox built around detailed physics of destruction and vehicle behavior. Every collision, turn, and acceleration is calculated in real-time... Read more
EP2K Electric Locomotive v1.1 (0.40.x)
- 🤖 Working with an AI agent? Press the 🤖 button and give the agent the link: it will install the mod into your game itself
-
Auto-installNo waiting Download55.09 MB 🤖November 14, 2026, 02:36 AMjelektrovoz-jep2k_1794613012_623779.zip
This mod adds the Russian EP2K DC electric locomotive to BeamNG.drive. The modification was developed for game version 0.34.2 and includes several paint schemes, functional lighting, and a physically accurate pantograph.
Features:
- 3 configurations with different paint schemes;
- Working lights;
- Functional wheels;
- Custom electric equipment sounds;
- Working mirrors;
- Physically accurate pantograph;
- Stable movement along railway tracks.
Coupling to railcars:
- Press L to couple the locomotive to railcars;
- Compatible with the Trains 25G mod by xxyksc, which adds Chinese passenger railcars, and the “Ammenndorf Coupe” railcar.
Controls:
- H — sound the horn;
- H — move the speedometer needle backward;
- L — move the speedometer needle forward;
- T — accelerate (W must also be pressed);
- G — slow down (S must also be pressed);
- Alt + A — change direction of travel;
- K — turn on the front headlights;
- [ — turn on the front marker lights;
- I — turn on the rear lights;
- ] — turn on the rear marker lights;
- Y — turn on the cab lights.
If the train does not move:
- Open the editor with F11 and pause the game with J;
- Lift the locomotive slightly above the rails;
- If the train still does not move, release the air brakes with the Down Arrow key and the independent brakes with P or Spacebar;
- Switch the transmission to M1 mode.
Known issues:
- The cab needles and gauges do not work;
- There are no control levers in the cab;
- The rear-facing cab camera points at a wall. Adjust its position manually for a proper view.
Changes in version 1.1:
- Reinforced the rear cab and central body;
- Changed the bogie's rotation center;
- Moved the traction motors on the rear bogie;
- Slightly improved the cab's 3D model.
Installation:
- Download the mod archive;
- Move the archive to the folder: C:\Users\UserNAME\Documents\BeamNG.drive\mods.
Данный мод добавляет в BeamNG.drive российский электровоз постоянного тока ЭП2К. Модификация разработана для версии игры 0.34.2 и включает несколько вариантов окраски, функциональную светотехнику и физически корректный токоприёмник.
Особенности:
- 3 конфигурации с различными вариантами окраски;
- Рабочая светотехника;
- Функциональные колёса;
- Собственные звуки электрического оборудования;
- Рабочие зеркала;
- Физически корректный токоприёмник;
- Устойчивое движение по железнодорожным путям.
Сцепка с вагонами:
- Для сцепки электровоза с вагонами нажать клавишу L;
- Совместимость с модом Trains 25G от автора xxyksc, добавляющим китайские пассажирские вагоны, и вагоном «Аммендорф Купе».
Управление:
- H — звуковой сигнал;
- H — переключение стрелки спидометра назад;
- L — переключение стрелки спидометра вперёд;
- T — разгон (необходимо также нажать W);
- G — снижение скорости (необходимо также нажать S);
- Alt + A — смена направления движения;
- K — включение передних фар;
- [ — включение передних буферных фонарей;
- I — включение задних фонарей;
- ] — включение задних буферных фонарей;
- Y — освещение кабины.
Если поезд не двигается:
- Открыть редактор клавишей F11 и поставить игру на паузу клавишей J;
- Немного приподнять электровоз над рельсами;
- Если поезд по-прежнему не двигается, отпустить воздушные тормоза клавишей Стрелка вниз и независимые тормоза клавишами P или Пробел;
- Переключить трансмиссию на режим M1.
Известные недочёты:
- Не работают стрелки и датчики в кабине;
- Отсутствуют рычаги управления в кабине;
- Задняя камера из кабины направлена на стену. Для корректного обзора необходимо самостоятельно изменить её положение.
Изменения в версии 1.1:
- Укреплена задняя кабина с центральным кузовом;
- Изменён центр вращения тележки;
- Перемещены тяговые двигатели на задней тележке;
- Немного улучшена 3D-модель кабины.
Установка:
- Скачать архив с модом;
- Переместить архив в папку: C:\Users\UserNAME\Documents\BeamNG.drive\mods.
Useful links:

