Face ID Not Working on iPhone? How to Fix It
Face ID can stop recognizing the iPhone owner after a system update, a drop, a new screen protector, or even ordinary dirt on the top part of the screen. Sometimes the issue can be fixed in a few seconds, while in other cases the device may need diagnostics. In this guide, we will explain why Face ID may not work, what you can check on your own, how to set up face recognition again, and when you may need to take your iPhone to a service center.
What to Do First
- Wipe the top part of the screen. Dirt or smudges can interfere with the TrueDepth camera.
- Check the screen protector and case. They must not cover the front camera area.
- Make sure your face is clearly visible. In normal mode, Face ID needs to see your eyes, nose, and mouth, so remove any mask, scarf, or other items covering your face.
- Look straight at your iPhone. Hold the smartphone about 25 to 50 cm away from your face.
- Restart the device. After it turns on, enter your passcode and try using Face ID again.
- Check for iOS updates. Open Settings → General → Software Update.
- Check Face ID settings. Go to Settings → Face ID & Passcode.
- If nothing helped, reset Face ID and register your face again.
Why Face ID Is Not Working on iPhone
Here are the most common causes and ways to fix them.
Face ID Does Not Recognize Your Face: The Camera Is Dirty or Blocked
Cause. The TrueDepth system, which is responsible for face recognition, is located at the top of the iPhone. A smudge, dirt, protective film, screen protector, or the edge of a case can partially cover the sensors.
Solution. Wipe the top part of the screen with a soft, dry cloth. At the same time, remove the case and check carefully whether it is covering the camera. If Face ID stopped working immediately after you installed a new screen protector, temporarily remove it and try again.
iPhone Does Not Recognize Your Face: Your Face Is Covered
Cause. In normal mode, Face ID needs to see your eyes, nose, and mouth. A mask, scarf, part of your clothing, or other items covering your face can interfere with recognition. Some sunglasses can also cause problems if they block infrared light.
Solution. Remove the mask or glasses and try unlocking your iPhone again. If you wear a mask regularly, you can enable the separate Face ID with a Mask mode on supported models.
Face ID Works Unreliably: You Are Holding the iPhone Incorrectly
Cause. Face ID needs to see your face from a suitable distance and angle. If you hold the smartphone too far away, turn it to the side, or try to unlock the device without looking at the screen, recognition may fail.
Solution. Hold the iPhone about 25 to 50 cm away from your face and look directly at the screen. On iPhone 13 and newer models with iOS 16 or later, Face ID works in both portrait and landscape orientation. On earlier iPhone models, portrait orientation is required.
Face ID Does Not Work After a Restart
Cause. After restarting an iPhone, Face ID is not used for the first unlock. At this point, the system requires the passcode you set.
What to do. Unlock the iPhone with your passcode, then use Face ID again. If recognition works normally after the first unlock, there is nothing wrong with the system.
Face ID Is Enabled but Does Not Work in an App
Cause. An app may support Face ID authorization but lack permission to use it. This can also happen when, after an update or settings change, the app stops offering sign-in through face recognition.
Solution. Open Settings → Face ID & Passcode → Other Apps and find the app you need in the list. Make sure Face ID access is enabled.
Face ID Stopped Recognizing You After a Change in Appearance
Cause. Face ID can adapt to changes in appearance, but a noticeable change in your look can sometimes affect recognition quality. For example, your face may look significantly different after a change in appearance.
Solution. Open Settings → Face ID & Passcode and select the option to add an alternate appearance. Then complete the standard face scanning process.
Face ID Stopped Working After an iOS Update
Cause. If Face ID stopped working after an iOS update, the reason may be a temporary software glitch.
Solution. Open Settings → General → Software Update and check whether a new iOS version is available. If an update is available, install it, restart your iPhone, and check Face ID.
Face ID Cannot Be Set Up Again
Cause. Sometimes registering your face again can fix issues related to the saved Face ID configuration.
Solution. Open Settings → Face ID & Passcode → Reset Face ID. After that, choose Set Up Face ID and follow the on-screen instructions. During registration, hold the iPhone in front of your face and follow the smartphone's prompts. Once setup is complete, try unlocking the device several times.
Face ID Does Not Work After a Drop or Liquid Exposure
Cause. If the issue appeared immediately after a drop, a hard impact, or liquid exposure, the TrueDepth components may be damaged. In this case, changing iOS settings usually will not help.
Solution. Check whether the camera works and whether the iPhone allows you to set up Face ID again. If the iPhone does not allow you to set up Face ID again or the camera works incorrectly, contact a service center.
Face ID Stopped Working After Screen Replacement
Cause. If Face ID worked normally before the screen replacement but stopped recognizing your face immediately after the repair, the problem may be related to the work performed or damage to TrueDepth system components.
Solution. Return to the service center and ask them to inspect the device. Replacing Face ID components yourself or trying to restore the system with third-party software may only make the situation worse.
Apple recommends having the TrueDepth system repaired by trained technicians.
What to Do if Face ID Does Not Work With a Mask or Glasses
Face ID can be used with a mask on supported iPhone models. The feature is available on iPhone 12 and newer models with iOS 15.4 or later. In this mode, the system analyzes the area around your eyes, so your eyes must remain uncovered.
To enable the feature, open Settings → Face ID & Passcode and turn on Face ID with a Mask.
If you wear regular glasses, you can add them to Face ID with a Mask using the Add Glasses option. Apple allows you to save up to four pairs of glasses. Sunglasses are not supported for this mode.
It is also important to consider the phone's orientation: Face ID with a Mask works only in portrait orientation.
What to Do if Face ID Is Temporarily Locked
If, after several failed attempts, your iPhone stops recognizing your face and asks for your passcode, this does not necessarily mean Face ID is broken.
Enter your passcode and try unlocking the smartphone again. If the feature starts working after that, no additional repair is needed.
If the iPhone regularly refuses to recognize your face or asks for the passcode for no obvious reason, check the TrueDepth camera, Face ID settings, and, if necessary, register your face again.
Frequently Asked Questions
Why did Face ID stop working after an iOS update?
Restart your iPhone, check for updates, and make sure Face ID is enabled in settings. If the problem persists, reset Face ID and set it up again.
Why does my iPhone ask for a passcode instead of Face ID?
In some situations, this is a normal security measure. For example, after restarting the device, you must enter your passcode first, after which Face ID becomes available again.
Why does Face ID not recognize me with glasses?
Most regular glasses do not interfere with face recognition. If the issue happens specifically with sunglasses, try removing them. Some models can block the infrared light used by TrueDepth.
What should I do if Face ID cannot be set up?
Check the TrueDepth camera, clean the top part of the screen, remove any accessories that may be in the way, and restart your iPhone. If that does not help, use Reset Face ID and register your face again.
Can Face ID be set up again?
Yes. Open Settings → Face ID & Passcode → Reset Face ID, then choose Set Up Face ID and complete the registration process.
What should I do if Face ID does not work after repair?
Return to the service center that repaired your iPhone and ask them to run diagnostics. If the TrueDepth camera is damaged or the system does not allow Face ID to be set up again, professional service will be required.
Can I use an iPhone without Face ID?
Yes. Even if Face ID is not working, you can unlock the smartphone with your passcode and continue using most device features. However, for some actions that use biometric authentication, you will need to enter the password manually.
-
Marvel Studios Announces First X-Men Cast for Its MCU Reboot -
"BioShock with Clowns": Twisted Tower Launches on Steam With 96% Positive Reviews -
Halo Studios outlines five key changes coming in next week's Halo: Campaign Evolved update -
2K Opens Small Axe Studios in Vancouver as Its New AAA Sports Team -
Mattel Launches Mattel Game Studios to Expand Games Based on Its Brands





